Redox‐Controlled Olefin (Co)Polymerization Catalyzed by Ferrocene‐Bridged Phosphine‐Sulfonate Palladium Complexes

The facile and reversible interconversion between neutral and oxidized forms of palladium complexes containing ferrocene‐bridged phosphine sulfonate ligands was demonstrated. The activity of these palladium complexes could be controlled using redox reagents during ethylene homopolymerization, ethylene/methyl acrylate copolymerization, and norbornene oligomerization. Specifically in norbornene oligomerization, the neutral complexes were not active at all whereas the oxidized counterparts showed appreciable activity. In situ switching between the neutral and oxidized forms resulted in an interesting “off” and “on” behavior in norbornene oligomerization. This work provides a new strategy to control the olefin polymerization process.     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

A Phosphorescent Platinum(II) Bipyridyl Supramolecular Polymer Based on Quadruple Hydrogen Bonds

A platinum(II) bipyridyl complex bearing bis‐ureidopyrimidinone (Pt‐bisUPy) has been designed and its self‐assembling behavior has been thoroughly investigated by ¹H NMR, DOSY NMR, Ubbelohde viscometry analysis, UV/Vis, and emission spectroscopies. Pt‐bisUPy underwent concentration‐dependent ring‐chain polymerization in apolar solvents. Hydrogen‐bonding interactions play an important role during the formation of the supramolecular polymers. Hydrogen‐bonded supramolecular polymers were transformed to nanoparticles in water through the miniemulsion method. These nanoparticles showed strong π–π excimeric emission. Metal‐metal‐to‐ligand charge transfer (MMLCT) from Pt–Pt interactions was not significant in the emission spectrum. The phosphorescence of the nanoparticle persisted even under aerobic conditions. The triplet state of these phosphorescent nanomaterials were long‐lived and possessed moderate emission quantum yields. Furthermore, the low toxicity of these materials promises a place for them in in vitro and in vivo bioimaging.     

Fluorinated star‐shaped block copolymers: Synthesis and optical properties

Tetrakis(4‐(1‐bromoethyl)phenyl)silane is synthesized and utilized to initiate the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) to generate bromo‐terminated four‐armed PMMA macroinitiators, which further initiate the ATRP of methylacryloyloxyl‐2‐hydroxypropyl perfluorooctanoate (FGOA) to create fluorinated star‐shaped block copolymers PMMA‐b‐poly(FGOA)s with fluorine content ranging from 0 to 31.7 wt %. The polymerizations are well controlled with the polydispersity indices <1.30. The polymers readily dissolve in common organic solvents and show good film‐formation. Compared with the nonfluorinated sample, the fluorinated films exhibit significantly increased water contact angles owing to the enrichment of fluorine on the surface. The enhanced hydrophobicity is advantageous for the optical stability when the devices work under a moist environment. Moreover, the films possess high thermo‐optic coefficients, tunable refractive indices, and extremely low birefringence coefficients because of the presence of bulky and rigid tetraphenylsilane core and star‐shaped topological structure, showing potential application in optical waveguide devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1969–1977     

Monitoring of the shrinkage during the photopolymerization of acrylates using hyphenated photorheometry/near‐infrared spectroscopy

This article describes a new method for the quantitative determination and time‐resolved monitoring of the polymerization shrinkage during ultraviolet (UV) photopolymerization. It is based on rheometry using a modified oscillating rheometer. Shrinkage is determined from the decrease of the gap between the rheometer plates. Moreover, near‐infrared (NIR) spectra can be recorded directly in the rheometer, which allows continuous determination of the conversion at any time of a shrinkage measurement. As both shrinkage and conversion data come from the same experiment, shrinkage can be analyzed in dependence on the current conversion achieved during UV irradiation, which enables direct investigation of correlations between both parameters. Hyphenated photorheometry/FT‐NIR spectroscopy was used for the determination of the polymerization shrinkage of pure acrylate monomers and oligomers as well as acrylate‐based formulations. Quantitative shrinkage values were found to be in excellent correlation with data that were determined by an independent method (via buoyancy measurements) and data from literature. Furthermore, the effect of ambient and irradiation conditions or the content of nanoparticles on the degree of shrinkage was studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 729–739     

Detrimental Ni(0) transfer in Kumada catalyst transfer polycondensation of benzo[2,1‐b:3,4‐b']dithiophene

This article deals with the Kumada Catalyst Transfer Polycondensation (KCTP) of 4,7‐dioctylbenzo[2,1‐b:3,4‐b']dithiophene ( BDP‐Oct ) using Ni(II) catalyst or In/cat combination. A combination of MALDI MS, GPC, and ³¹P NMR spectroscopy is used to reveal the failure of the KCTP of this particular monomer. Intermolecular transfer reactions to monomer appeared to prevent the formation of polymer. This result is remarkable, since isomeric benzo[1,2‐b:4,5‐b']dithiophene polymerizes in a controlled way. The presence of a “non‐aromatic double bond” in annulated monomers is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1706–1712     

Redox‐responsive core cross‐linked micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) by Diels‐Alder reaction for doxorubicin release

Redox‐responsive core cross‐linked (CCL) micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) (PEO‐b‐PFMA) block copolymers were prepared by the Diels‐Alder click‐type reaction. First, the PEO‐b‐PFMA amphiphilic block copolymer was synthesized by the reversible addition‐fragmentation chain transfer polymerization. The hydrophobic blocks of PFMA were employed to encapsulate the doxorubicin (DOX) drug, and they were cross‐linked using dithiobismaleimidoethane at 60 °C without any catalyst. Under physiological circumstance, the CCL micelles demonstrated the enhanced structural stability of the micelles, whereas dissociation of the micelles took place rapidly through the breaking of disulfide bonds in the cross‐linking linkages under reduction environment. The core‐cross‐linked micelles showed fine spherical distribution with hydrodynamic diameter of 68 ± 2.9  nm. The in vitro drug release profiles presented a slight release of DOX at pH 7.4, while a significant release of DOX was observed at pH 5.0 in the presence of 1,4‐dithiothreitol. MTT assays demonstrated that the block copolymer did not have any practically cytotoxicity against the normal HEK293 cell line while DOX‐loaded CCL micelles exhibited a high antitumor activity towards HepG2 cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3741–3750     

Control of chain ends of polyesters in polycondensation of AA and BB monomers by use of solid‐phase reagent

For selective synthesis of linear polyester having a functional group at one end, polycondensation between 1,4‐butanediol ( 1a ) and sebacoyl chloride ( 2a ) and between 1,12‐dodecanediol ( 1b ) and isophthaloyl chloride ( 2b ) was conducted in the presence of oxime resin or oxime silica gel, followed by cleavage of the formed polyester from the solid‐phase support with aniline. Matrix‐assisted laser desorption ionization time‐of‐flight mass spectra and ¹H NMR spectra of the cleaved polyester showed that the products contained not only polyester with anilide at one end ( poly 1 ), but also polyester with anilides at both ends ( poly 2 ). The product ratio of poly 1 to poly 2 ( poly 1 / poly 2 ) was dependent on monomers, monomer concentration, feed ratio of monomer to oxime moiety in the support, oxime content in the support, reaction solvent, and the nature of the support. Polyester with a high poly 1 / poly 2 ratio of 81/21 and moderate molecular weight (M_n = 1430 g/mol) was obtained by polycondensation of 1b and 2b in the presence of oxime silica gel in dichloromethane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1379–1386